May 2026
4 - 5 May 2026
2 days, 9:00 AM - 4:30 PM
This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, as well as electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PSI 6100 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PSI 6100 Welding Inverter. The course is priced per student, with a maximum of six students per class.
4 - 5 May 2026
2 days, 9:00 AM - 4:30 PM
This two-day course provides familiarization with the configuration and programs of all types of motion available in the Bosch Rexroth’s IndraMotion MLC control hardware (CML or XM series). This course uses IndraWorks™ software for parameterization and program monitoring. Training is enhanced through class exercises designed to re-enforce each programming concepts. The IndraLogic Visualization function is used for controlling program operation and for program monitoring.
6 - 7 May 2026
2 days, 9:00 AM - 4:30 PM
This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.
Wed 6 May 2026
9:00 AM - 4:30 PM (7 hours 30 minutes)
This one-day add-on course provides familiarization with the programming of motion available in Bosch Rexroth’s IndraMotion series MLC* control in both XM and CML/Lx5 controllers. This course uses IndraWorks™ software for programming, parameterization, and program monitoring. Training is enhanced through class exercises designed to reinforce each programming concepts. The IndraLogic Visualization function is used for controlling program operation and for program monitoring.
7 - 8 May 2026
2 days, 9:00 AM - 4:30 PM
This two-day course provides familiarization with the electrical connections, functions, and various operating modes of Bosch Rexroth’s IndraDrive HCS02 – 04, HMS, and HMD digital servo drive series and the HMV series power supply units. This course also covers the use of IndraWorks™ software for parameterization of drives, system and fault information, and system recognition of components. Training is enhanced through class exercises designed to reinforce each aspect of the operation of the drive.
Mon 11 May 2026
9:00 AM - 4:30 PM (7 hours 30 minutes)
This one-day add-on course provides familiarization with the programming of motion available in Bosch Rexroth’s IndraMotion series MLC* control in both XM and CML/Lx5 controllers. This course uses IndraWorks™ software for programming, parameterization, and program monitoring. Training is enhanced through class exercises designed to reinforce each programming concepts. The IndraLogic Visualization function is used for controlling program operation and for program monitoring.
14 - 15 May 2026
2 days, 9:00 AM - 4:30 PM
This two-day course provides familiarization with the electrical connections, functions, and various operating modes of Bosch Rexroth’s IndraDrive Cs digital servo drive. This course also covers the use of Bosch Rexroth’s IndraWorks™ software for parameterization of drives, system and fault information, and system recognition of components. Training is enhanced through class exercises designed to reinforce each aspect of the operation of the drive.
Tue 19 May 2026
9:00 AM - 4:30 PM (7 hours 30 minutes)
This one-day course provides an introduction to the electrical connections, functionality, and operating modes of the ctrlX Core industrial control device. The course also covers the use of Rexroth’s ctrlX Works™ software for commissioning and configuring ctrlX Core components. Training is reinforced through hands-on class exercises designed to strengthen understanding of each aspect of ctrlX Core operation.
20 - 21 May 2026
2 days, 9:00 AM - 4:30 PM
This two-day course provides hands-on familiarization with the electrical connections, operating modes, and functionality of Bosch Rexroth’s ctrlX Drive. Participants learn to use ctrlX Drive Engineering software for parameterization, system configuration, and fault diagnostics, with practical exercises that reinforce real-world drive operation and system understanding.
27 - 28 May 2026
2 days, 9:00 AM - 4:30 PM
This two-day course provides familiarization with the electrical connections, functions, and various operating modes of Bosch Rexroth’s IndraDrive Cs digital servo drive. This course also covers the use of Bosch Rexroth’s IndraWorks™ software for parameterization of drives, system and fault information, and system recognition of components. Training is enhanced through class exercises designed to reinforce each aspect of the operation of the drive.
June 2026
1 - 2 Jun 2026
2 days, 9:00 AM - 4:30 PM
This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.
2 - 3 Jun 2026
2 days, 9:00 AM - 4:30 PM
This two-day course provides an overview of the electrical connections, functions, and operating modes of Bosch Rexroth’s IndraDrive digital servo drive family. Participants compare hardware and functional differences across IndraDrive variants and use IndraWorks™ for drive parameterization, system recognition, and fault diagnostics. Hands-on exercises reinforce key operating concepts.
3 - 4 Jun 2026
2 days, 9:00 AM - 4:30 PM
This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.
5 - 8 Jun 2026
4 days, 9:00 AM - 4:30 PM
This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.
9 - 11 Jun 2026
3 days, 9:00 AM - 4:30 PM
This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.
10 - 12 Jun 2026
3 days, 9:00 AM - 4:30 PM
This three-day course introduces new users to the IndraLogic Gen2 PLCopen programming environment. It covers program structure, task configuration, data and variable types, debugging, and monitoring across all supported languages. Participants develop and run a multi-language project in a simulated environment and use IndraLogic Visualization for control and troubleshooting.
15 - 16 Jun 2026
2 days, 9:00 AM - 4:30 PM
This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, as well as electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PSI 6100 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PSI 6100 Welding Inverter. The course is priced per student, with a maximum of six students per class.
15 - 16 Jun 2026
2 days, 9:00 AM - 4:30 PM
This two-day online course builds on basic IndraDrive training & focuses on the Motion-Logic function of the IndraLogic Gen1 PLC within Bosch Rexroth IndraDrive digital servo drives. Participants learn setup, parameterization, programming, & operation of the integrated PLC, including task timing, I/O, expansions, & HMI interfacing. Training is reinforced through exercises using IndraWorks™ software, PLCopen motion function blocks, & IndraLogic Visualization to simulate HMI control & monitor axis operation.
17 - 18 Jun 2026
2 days, 9:00 AM - 4:30 PM
This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.
17 - 18 Jun 2026
2 days, 9:00 AM - 4:30 PM
This two-day course focuses on the multi-axis Motion-Logic functionality of the IndraLogic Gen2 PLC integrated within Bosch Rexroth IndraDrive digital servo drives. Building on knowledge from the #1142 MLD-S course, students will configure, parameterize, and operate the integrated PLC, including task timing, system I/O, expansion options, programming, and multi-axis operation, as well as methods for interfacing with additional drives and HMIs.
24 - 26 Jun 2026
3 days, 9:00 AM - 4:30 PM
This three-day course provides hands-on training on Bosch Rexroth’s ctrlX Drive and ctrlX Core, focusing on electrical connections, operating modes, and integrated system operation. Participants learn to use ctrlX Drive Engineering and ctrlX Works software for parameterization, commissioning, configuration, and diagnostics, with practical exercises that build real-world proficiency in drive and control applications.
29 Jun 2026 - 1 Jul 2026
3 days, 9:00 AM - 4:30 PM
This three-day course equips IndraLogic users with the skills needed to develop applications in the PLCopen programming environment. Topics include project structure, library management, device and target configuration, task setup, variable types, fieldbus integration, and motion programming using function blocks. Programming is covered using Structured Text, Instruction List, Ladder Diagram, Function Block Diagram, and Sequential Function Chart.
July 2026
13 - 14 Jul 2026
2 days, 9:00 AM - 4:30 PM
This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, as well as electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PSI 6100 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PSI 6100 Welding Inverter. The course is priced per student, with a maximum of six students per class.