Upcoming Trainings

28 - 29 Jul 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, as well as electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PSI 6100 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PSI 6100 Welding Inverter. The course is priced per student, with a maximum of six students per class.

28 - 29 Jul 2025

2 days, 9:00 AM - 4:00 PM

This two-day course continues and expands on the programming knowledge gained in the #2110 course. This course uses IndraWorks™ software for programming, parameterization, and program monitoring. Training is enhanced through class exercises designed to reinforce each programming concepts. The course is priced per student, with a maximum of six students per class.

30 - 31 Jul 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.

31 Jul 2025 - 1 Aug 2025

2 days, 8:30 AM - 4:00 PM

This two-day course provides familiarization with the electrical connections, functions, and various operating modes of Bosch Rexroth’s IndraDrive Cs digital servo drive. This course also covers the use of Bosch Rexroth’s IndraWorks™ software for parameterization of drives, system and fault information, and system recognition of components. The course is priced per student, with a maximum of six students per class.

4 - 5 Aug 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, as well as electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PSI 6100 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PSI 6100 Welding Inverter. The course is priced per student, with a maximum of six students per class.

6 - 7 Aug 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.

11 - 12 Aug 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, as well as electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PSI 6100 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PSI 6100 Welding Inverter. The course is priced per student, with a maximum of six students per class.

13 - 14 Aug 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.

18 - 19 Aug 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, as well as electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PSI 6100 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PSI 6100 Welding Inverter. The course is priced per student, with a maximum of six students per class.

18 - 20 Aug 2025

3 days, 9:00 AM - 4:00 PM

This three-day course provides familiarization with the programming of basic types of motion available in the Rexroth IndraMotion MLC using the XM series control. This course uses IndraWorks™ software for programming, parameterization, and program monitoring. Training is enhanced through class exercises designed to re-enforce each programming concept. The course is priced per student, with a maximum of six students per class.

20 - 21 Aug 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.

21 - 22 Aug 2025

2 days, 9:00 AM - 4:00 PM

This two-day course continues and expands on the programming knowledge gained in the #2410 course. This course uses IndraWorks™ software for programming, parameterization, and program monitoring. Training is enhanced through class exercises designed to reinforce each programming concepts. The course is priced per student, with a maximum of six students per class.

25 - 26 Aug 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, as well as electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PSI 6100 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PSI 6100 Welding Inverter. The course is priced per student, with a maximum of six students per class.

27 - 28 Aug 2025

2 days, 8:30 AM - 4:00 PM

This two-day course is designed for weld engineers, programmers, and maintenance electricians. It covers the theory of operation and the function of major components, along with electrical interface, diagnostics, and practical troubleshooting. Hands-on training is conducted using the PRC 7000 Welding Inverter simulators. The course also includes instruction on backing up and restoring the PRC 7000 Welding Inverter. The course is priced per student, with a maximum of six students per class.

4 - 5 Sep 2025

2 days, 9:00 AM - 4:30 PM

This two-day course provides familiarization with the electrical connections, functions, and various operating modes of Bosch Rexroth’s IndraDrive Cs digital servo drive. This course also covers the use of Bosch Rexroth’s IndraWorks™ software for parameterization of drives, system and fault information, and system recognition of components. The course is priced per student, with a maximum of six students per class.

8 - 10 Sep 2025

3 days, 9:00 AM - 4:30 PM

This three-day course provides familiarization with the electrical connections, functions, and various operating modes of Bosch Rexroth’s IndraDrive digital servo drive family. It highlights the hardware similarities and differences between the different versions of the IndraDrive . It highlights the operational and functional similarities and differences between the different versions of the IndraDrive. The course is priced per student, with a maximum of six students per class.

11 - 12 Sep 2025

2 days, 9:00 AM - 4:30 PM

This two-day course provides familiarization with the electrical connections, functions, and various operating modes of Rexroth’s IndraMotion MLC using the Lx5 series control hardware along with the IndraDrive series Servo Drives. This course also covers the use of IndraWorks™ software for programming, parameterization, system and fault information, and system recognition of components. The course is priced per student, with a maximum of six students per class.

17 - 18 Sep 2025

2 days, 9:00 AM - 4:00 PM

This course provides familiarization with the electrical connections, functions, and various operating modes of Bosch Rexroth’s ctrlX Drive digital servo drive. This course also covers the use of Rexroth’s ctrlX Drive Engineering™ software for parameterization of drives, system and fault information, and system recognition of components. Training is enhanced through class exercises designed to reinforce each aspect of drive operation.

22 - 24 Sep 2025

3 days, 9:00 AM - 4:30 PM

This three-day course provides familiarization with the electrical connections, functions, and various operating modes of Bosch Rexroth’s IndraDrive digital servo drive family. It highlights the hardware similarities and differences between the different versions of the IndraDrive . It highlights the operational and functional similarities and differences between the different versions of the IndraDrive. The course is a fixed cost for up to six students per class.

25 - 26 Sep 2025

2 days, 9:00 AM - 4:30 PM

This two-day course provides familiarization with the electrical connections, functions, and various operating modes of Rexroth’s IndraMotion MLC using the XM series control hardware along with the IndraDrive series Servo Drives. This course also covers the use of IndraWorks™ software for programming, parameterization, system and fault information, and system recognition of components. The course is a fixed cost for up to six students per class.

29 Sep 2025 - 1 Oct 2025

3 days, 9:00 AM - 4:30 PM

This three-day course provides familiarization with the programming of basic types of motion available in the Rexroth IndraMotion MLC using the XM series control. This course uses IndraWorks™ software for programming, parameterization, and program monitoring. Training is enhanced through class exercises designed to re-enforce each programming concept. The course is priced per student, with a maximum of six students per class.

2 - 3 Oct 2025

2 days, 9:00 AM - 4:00 PM

This two-day course continues and expands on the programming knowledge gained in the #2410 course. This course uses IndraWorks™ software for programming, parameterization, and program monitoring. Training is enhanced through class exercises designed to reinforce each programming concepts. The course is priced per student, with a maximum of six students per class.

6 - 8 Oct 2025

3 days, 9:00 AM - 4:30 PM

This three-day course provides familiarization with the electrical connections, functions, and various operating modes of Bosch Rexroth’s IndraDrive digital servo drive family. It highlights the hardware similarities and differences between the different versions of the IndraDrive . It highlights the operational and functional similarities and differences between the different versions of the IndraDrive. The course is priced per student, with a maximum of six students per class.